UV type OCA optical adhesive coating compound Equipment,

 Main technical indicators

1.Coating substrate:PET/release film  substrate thickness:25-200μm  substrate width:maximum 800-1600mm

2.Composite substrate:release film      substrate thickness:25-200μm  substrate width:maximum 800-1600mm

3.Coating method:roll/slot

4.Coating slurry characteristics:full solid UV pressure sensitive adhesive, viscosity 200-10000CPS

5.Dry glue thickness range:50um-500un

6.Solvent Type:None

7.Guide rollers:non-driven guide rollers adopt oil bath type)       

8.Mechanical speed:60m/min, normal production speed 5-50m/min

9.Tension control:floating roller + sensor double closed-loop control

10.Tension range:1-30kgf/full width (depending on the thickness of the substrate)

11.Loading structure of rewinding and unwinding:safety chuck/air cap 

12.Rewinding and unwinding diameter:Max800-1000㎜ (AGV can be reserved in design) 

13.Inflatable shaft specification:3 inches/6 inches (can be configured with inflatable sleeve)      

14.UV box length:40m (5m section*8)  

15.UV box temperature control:20-35℃, cooling method:air cooling

16.Power voltage:380V-50Hz-3P

17.Air pressure:5kg/cm2 (Max.7kg/cm2)

18.The main steel frame:made of rectangular steel, the Equipment, is installed in a 10,000-level clean room

19.Process flow:

        Second Unwind→Storage→Dust

Unwinding→Storage→Dust→Incoming Traction→Roller/Slit→UV→Deflection→Traction→Storage→Outlet Traction→Thickness Detection→CCD Detection&rarr ;winding