Anode coating Equipment, fuel cell coating Machine, hydrogen battery coating Machine,

   Main technical indicators

1.Coating substrate/composite  thickness 50-180um

2.Mechanical speed:6m/min   

3.Production speed:0.5-5m/min (production speed depends on process recipe)

4.Coating form:single-sided slit coating

5.Paint Type:Solvent-based

6.Coating viscosity:10~300cps; solid content 2~10%

7.Coating thickness:1-15μm (process decision)

8.Maximum width of substrate:600mm

9.Maximum diameter of unwinding:Φ300mm

10.Maximum diameter of winding:Φ400mm

11.Maximum diameter of peeling and winding:Φ300mm

12.Inner diameter of substrate core:3" air shaft

13.The maximum temperature of the oven:160℃ (electric heating)

14.Oven length:8m (2m/zone*4 zone)

15.Electrical control:PLC, servo drive control

16.Machine, orientation:see the film drawing

17.Power of the whole Machine,:subject to the final design

18.Working environment:temperature 15-30℃, relative humidity 70-90%

19.Dust-free grade:above 10000

20.Air pressure:5kg/cm2 (Max.7kg/cm2)

Process flow:final communication confirmation