Lithium-plastic composite film coating Equipment, (coating/hot pressing)

   Main technical indicators

1.Coating substrate:customer self-filling

2.Composite substrate:customer fills in by himself

3.Substrate width:1000 ㎜ 

4.Solvent type:ethyl acetate

5.Roll width:1200 ㎜ 

6.Mechanical speed:up to 120 m/min, normal production speed 10-100 m/min

7.Rewinding and unwinding diameter:800 ㎜, maximum load capacity 800 ㎏

8.Length of bellows:4m/zone*4=16m

9.The maximum temperature of the bellows:130℃ 

10.Heating method:natural gas heating (optional heating method)

11.Coating method:closed gravure coating

12.Film direction:subject to final design 

13.Material requirements of guide rollers:the first unwinding to compounding, compounding to winding section, common idler rollers are chrome-plated steel rollers, and the second unwinding to compounding place are aluminum roller anodes

14.1# unwinding tension:5-60kgf/full width, 2# unwinding tension:1-30kgf/full width, oven tension:5-100kgf/full width, winding tension:10-100kgf/full width Wide 

15.Voltage:380V-50Hz-3P 17

16.Air pressure:5kg/cm2 (Max.7kg/cm2) 

17.Process flow:subject to final design